Many people have Coleman tents and camping equipment, and if they are well taken care of they can last for many years. When a part on one of these tents breaks down, it can be extremely expensive to replace. There are many small things that can break down the tent, and there is no way for the professional repair person to check each and every part of your tent before replacing the part. Here are some of the most common parts that need to be replaced in tents.
You might think that the most common part to have fixed is the rain fly. It does seem logical that you'd want to replace the rain fly when it gets damaged, but in many cases, the fly is actually much more difficult to replace than the tent. The rain fly is connected to the inner tent by several threads, and is much heavier than any other part of the tent. There are different ways to repair the rain fly, depending on the type of damage that you see.
Sometimes Coleman tent replacement parts will state that they can only be fixed with sewing. This isn't really the case, and it can be a real pain trying to get the tent to match your new replacement part. Sewing the seams can cause problems with the overall structure of your tent, so it is not recommended. If you suspect that this has been done, then contact the company and get it fixed as soon as possible. Your time is worth much more in an emergency than having the tent damaged further.
Another common part that has to be replaced is the rain fly grommets. They will usually pop out when they aren't functioning correctly. In order to prevent them from falling out, you'll have to replace them all at once. It isn't usually very difficult to replace them, but it is an important job that shouldn't be taken lightly.
If you are a camper who camp often, you may find that the stakes on the tent no longer work properly. If you have never assembled them before, then this can be quite a difficult job to do. You may have to disassemble the entire tent in order to get the problem fixed. Don't try to fix it on your own, unless you have the correct tools.
If you are looking to replace a part that uses gas, then you might be best off buying it new. Coleman has put out gas lanterns for years, but they are not well supported by the manufacturer. You'll probably have to buy the gas from another source if you want to replace the lanterns in your Coleman. Even though Coleman makes camping lanterns that are very durable, they don't hold up over time, and you might be better off replacing them with the models made by other companies.
Replacement parts for a Coleman tent are available in many places. If you have ever gone to a store that sells outdoor equipment, you may find that there are plenty of options available. You should also check online for dealers of Coleman tents. The internet is a great place to search for replacement parts at affordable prices. It might be worth visiting a camping or sporting goods store first to see if they carry the parts that you need.
Even if you can't locate any replacement parts for a Coleman tent online or in a store, you can sometimes get a good deal on brand new parts by shopping at an auction or garage sale. It's a good idea to have some idea of what the tent is made of before you buy any parts. There are lots of different types of materials used in the construction of a Coleman. Some of the parts, like the rain fly screen, can be purchased separately. When you get to the repair shop, they will usually give you advice about which parts you need.
When using pole repair sleeves, it is the most expedient and convenient method of repairing a broken pole. A short tube, also known as a splint, is frequently included with the packaging of your tent. You should purchase one immediately if you do not already have one. In order to prevent excessive movement, pole repair sleeves should have a diameter that is slightly larger than the diameter of the pole being repaired.
A tape measure or a ruler should be placed next to the end of your pole to ensure that it is straight. Using a tape measure, take another measurement on a different section of your pole and repeat the process. Take a look at the circumference right now. By simply holding a tape measure up to the pole, it is nearly impossible to obtain an accurate measurement of its diameter. Measure the diameter of the fiberglass tube rather than the diameter of the metal sleeve. Tent diameters ranging from 7.9mm to 8.5mm, 9.5mm to 11.2mm, and 12.7mm are the most commonly encountered. Smaller sizes are occasionally available for poles that are extremely small, but there are no intermediate sizes available. The smallest number of millimeters visible on your tape measure corresponds to a size that is one size larger than what you require on your clothing scale.
This is a fiberglass tent pole that has been constructed in the traditional fashion. This package includes two vinyl end caps in addition to the five sections and a shock cord that are included in the price.
When camping, you're more likely to break a tent pole than when you're not. The cause could be attributed to a variety of factors, including high winds, aging poles, and low-quality building materials.
As you heat it with a heat gun on the ferrule tip of the pole, take hold of the ferrule with pliers and turn it to see if it moves as you heat it. Overheating the pole will result in it catching fire, so take care not to overheat the pole.
When compared to other materials, aluminum poles are relatively light in weight. Aluminum poles are significantly lighter than poles made of wood or thermosetting plastic, both of which are significantly more heavy materials. Aluminum poles are significantly lighter in weight when compared to other materials such as wood, fiberglass, stainless steel, or their alloys such as steel, for example.
As a result, it is typically more expensive than aluminum in the majority of cases. Because fiberglass is more expensive than other materials, it may not be the best option if you have a limited spending budget. On the other hand, fiberglass requires a significant amount of maintenance to keep it in good condition. The fact that aluminum is a metal, on the other hand, means that it possesses greater structural strength.
If you compare aluminum to fiberglass, aluminum is significantly more resistant to breaking and cracking when struck. Aluminum has abrasion resistance that is superior to that of other metals. Aluminum is also corrosion-resistant. Sharp objects can puncture an aluminum hull if struck with enough force, but they are far less likely to cause significant damage than other materials.
When using pole repair sleeves, it is the most expedient and convenient method of repairing a broken pole. A short tube, also known as a "splint," is frequently included with the packaging of your tent. You should purchase one immediately if you do not already have one. In order to prevent excessive movement, pole repair sleeves should have a diameter that is slightly larger than the diameter of the pole being repaired.
PVC piping can be used to reinforce or replace fiberglass tent poles, and it is both simple and inexpensive to do. Consider the length and diameter of the tent poles when making your selection. This project calls for the use of a fiberglass tent pole with an inner diameter that is larger than the existing fiberglass tent pole. Piping with a diameter of 1/2 inch is usually sufficient for the vast majority of applications.
To tighten the thread, even more, tie a simple binding knot about 2 inches from the end of the thread's length. Your peg should now be positioned so that it is between the knot and the long end of the rope, as shown in the illustration. The cord should be fed through the first section of the pole, and so on until all sections of the pole are connected to the cord.
Shock cords are typically used to secure tarps or other covers that are placed on top of a load during transportation. Because of their ability to secure loads without the use of knots, they have become a popular choice for use in this environment.
The fact that Coleman tents are less expensive than those from other well-known brands is due to the fact that they are constructed of lightweight and inexpensive materials. Tent manufacturing and sales costs can be reduced by substituting polyester fabrics for nylon fabrics in the manufacturing and sale of tents.
When the poles are split open, the inner elastic that holds the various sections of the poles together can be seen running through them. This is a common issue with the materials in question. Fortunately, gaffa/duct tape, which can be found almost anywhere, is a low-cost and highly effective field repair solution. A similar project has been completed in the past, and the tape remained usable for several more seasons after we finished it. When going camping, don't forget to bring along some gaffer tape.
If the elastic hasn't snapped yet, it can be re-used several more times. On the contrary, stretching the elastic in order to thread the poles on will make it more difficult to work with than it was previously.
Duct tape can be used to temporarily repair a broken tent pole in an emergency situation, but this should not be relied on in the future. Duct tape should be used to cover the break once it has become strong enough to support the weight of your tent. In order to provide additional support before taping the break, you can use a makeshift splint.